Topic: Sketch Challenge
Close enough - that's what I call it when the measurements of the parts and pieces a just a smidge off but you can still recognie the sketch that was used. Here is OWH sketch 31:
Right away you can see that the sketch has been rotated a quarter turn to the right. this was because I wanted to use a salvaged embossed metal piece with that orientation. the scrap bin held all different shades of green so I chose a chevron paper that had gray to echo the silver in the feature block.
The silver block I used was not the correct size but 'close enough'. I used one of the scrap bin greens to border it.
My camera was having some issues with all the greens and really 'flattened' them They are really much more vibrant that this.
Ddd
Posted by studio3d@ccgmail.net
at 12:01 AM PST
