| « | March 2015 | » | ||||
 |
||||||
| S | M | T | W | T | F | S |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 29 | 30 | 31 | ||||
OWH sketch 188 looks like a party!
I had some 3D acrylic stickers that look like balloon animals. What fun!
I decided to use bricht papers with chevrons and dots in some of the same colors as the stickers and followed the sketch measurements. Then I arranged the stickers. Aren't they adorable!
That chevron is actually red and gold instead of white and pink! This allows the white rubon text to show up well.
Ddd
I decided to have another go at a masculine card for OWH sketch 187
The first thing that has to go for a masculine card is that bow! I just left it off entirely.
I had a some stickers in my stash with a sports theme. The largest fit the lower block in the sketch with the exception of the trimmed corners.
I keyed the colors in the remaining blocks off of that tag shape - browns for the balls and blue of the background.
I used a couple of other stickers from the sheet in the banner shape at upper left as they repeated the colors and the theme.
I don't know what occasion this would be sent for but I do like the look of it!
Ddd
This next sketch for the challenge was a good one to turn into a masculine card. Here's OWH sketch 186:
I already had a dragonfly stamp colored up with warm neutrals. I cut it to size and used Distress Ink to tone the edges. I selected background papers of a ledger, text in columns and a crosshatch.
Everything was cut and assembled according to the sketch and only added a gold peel off greeting.
As a finish I toned all the edges with more of the Distress Ink.
Ddd
Time to get back to the sketches if I want to catch up by the end of the year! Sketch 185 was so plain it almost made me yawn.
I had in mind to use a particular sticker for the square element but it was not large enough. I decided to border it to bring it up to size.
I had some solids in the scrap bin and three tones of green worked really well together. Not only that but they were already almost the size needed. Cool.
So I glued the greens down and realized that the little square looked like it was falling off the bottom. So I popped it up on foam tape and moved it up closer to the crossbar. Good, but not quite there.
I added some rhinestones to the crossbar to add to the center of interest. Better, still needs something.
I finished up with bordering lines in purple to match the rhinestones and flower.
Best.
Ddd
This quilt that I just finished has some history! Many years ago my mom thought she'd like to make a quilt out of old jeans. She chose a log cabin as her pattern and laboriously drew around templates and cut the pieces out with scissors. As soon as she started with the actual sewing, she realized that she had no patience for the process and put all the pieces away.
Eventually, those pieces of denim were gifted to my sister who used up a lot of them in her quilt-making - with much more success! Then she put away the leftovers.
Well, a couple of years ago my birthday gift box came with a stack of these leftover denim scraps. I kept only the ones that were 7 1/2 x 2 1/2 and they have been sitting in my 'I don't know what to do with these' bin since then.
A few weeks ago, I ran across an idea on Pinterest on how to use denim in quilts without sewing through two layers of heavy fabric. You just splice the pieces together by sewing in a 1" wide strip of designer fabric. The seam allowances of 1/4 inch on each side allow the denim to butt up against the next piece with no overlapping. Genius!
Since I had long, skinny blocks I used this splicing on all the pieces end to end, creating one long strip. Then I put a 1" strip on one whole edge, cut the long strip in half and sewed these two together. I continued in this manner (like making a jelly-roll race quilt) until I had a quilt top!
One additional strip on the unfinished side and matching ones on the ends made a skinny border.
I didn't want to create another border or binding and the finish on the existing border would be 1/2 inch. So I decided to make it a turned quilt. To do this, I laid down the batting, then the backing (face up) then the quilt top (face down). I pinned it all and stitched 1/4 inch all around - leaving an opening for turning.
I pressed the seam allowances in the opening then un-pinned it all and turned right side out.
The border was pinned and stitched in the ditch all around. Then I pinned the top while smoothing it into place. The quilting is a serpentine stitch up the middle of the long strips.
The prints are all scraps from a recent quilt top that I've yet to put the backing on. They were pink/teal/white/brown and featured paislies/tiny flowers/roses.
I added in some tone on tone fabric in pink and teal and some green scraps with a bit of the pink in them.
This finishes up at roughly 43 inches on the short side. It is not square but I don't know what the longer measure is. I made sure to offset the 'bricks' as I knew they would never line up just right. With this arrangement it really doesn't matter.
Here's a peek at the quilting.
This fun teal polka dot is the backing. You can see the quilting on the back is very attractive, too.
Final count: leftover denim scraps=0
This decades long family project is officially done!
Ddd
The paper embroidery group finished up with the original alphabet swap and were already up to J on this second round. For the first round we got to make whatever we wanted that matched the letter. This time, the host is assigning the word we use for our theme.
Our assignment was J is for Job. Since I am retired, I decided to allude to my career of 30 years as a public library manager. So I went with the theme of 'reading'.
Now that I'm retired I do have more time to read!
You may recognize this as my bookmark pattern. I just moved the text to the right to balance it out for use on a card format.
Ddd
For a challenge, I made a paper embroidery card with the theme of 'shoes'. I know there are some out there that are gaga over shoes, but I am a tennies girl and wear them daily. I do have a few dress shoes but they are all flats.
At my age, I can't afford to fall off my shoes!
I was surprised and pleased to discover I had some peel-off stickers of shoes and I chose a stitched frame to show them off.
I did the stiching on a print with dress forms to stay with the fashion theme. The panel is mounted on shiny gold to go with the shoe stickers.
The text sticker is from the same sheet as the shoes.
Ddd
I've gotten a bit behind on doing 2 Christmas cards a month for the paper embroidery group. These are not swapped, just put into our stash for our own use when the season arrives.
I did get one done this month, though.
I stitched on a paper that is printed with a fair isle knit pattern. The threads (all metallic) did not show up well on it so I used a light alcohol marker to create shadow areas and now it looks better.
Not ready for Christmas yet, but it's a start.
Ddd
I don't know what kind of flowers these are but I stitched them in the spring so I am calling them spring flowers. This was the theme of a challenge on one of my groups.
I stitched with bright yellow, lime green and true orange and then backed it with an orange cardstock to match the flower centers.
The cardstock sticker matched the colors perfectly and is a sweet sentiment!
Ddd
Another month, another 'Tim Tag'. I am continuing on my plan to complete all 12 of Tim Holtz's 12 Tags of 2015. We are now up to March and here is the tag that Tim made and posted instructions for:
So here are the steps I followed - with different products and/or processes while aiming to get a similar result.
--cut a heavy piece of patterned cardstock, printed with a lace design
--create a collage of tissue tapes while leaving some areas of the background exposed
--on a non-stick craft sheet, squirt some acrylic paint in various colors. I used 'one-stroke' paints in lavender, pink, red, blue and yellow
--mist with water and mix it into each color to make them thinner
--swish the collage through the paint
--mist the paint with water to allow it to blend
--use heat tool to dry completely
--use archival ink in jet black to stamp butterfly - I used my hand carved stamp
--while still wet, apply clear detail embossing powder
--hit with a heat gun to complete embossing the butterfly
--stamp and cut a mask for the butterfly
--put on the mask then place a stencil over the top
--use a stiff card to squeege texture paste through the stencil
--remove the stencil and the mask
--sprinkle with gold detail embossing powder
--LEAVE TO DRY FULLY WITHOUT HEATING
--after completely dry, use heat gun to melt the gold embossing powder
--cut into tag shape of desired size
--apply adhesive to the entire back using the Xyron machine
--stick the tag to heavy black cardstock
--trim the black down to a thin outline
--use hole punch at the top of the tag
--use punches to create a black 'hole reinforcement' and glue it on
--press two Distress Ink pads to the non-stick craft sheet
--mist with water
--wad up a length of seam binding and press it into the color. mist it with water to spread the color
--crinkle the binding and dry with heat tool
--thread binding through the hole in the tag and knot it
--connect a charm to the ribbon with a pin
--attach a key charm with the ribbon
--glue other metallic charms to the surface
Here is the result of my effort:
For the last two months I have made display pieces instead of tags. I did make a tag this month but I have no idea how I might use it.
Ddd
This one just grew one step at a time. Here is the sketch for OWH 184:
In all that sorting through the fancy diecuts I came across one that looked like a doily. I decided to feature lace elements on this card.
The background is a lace print. On top of that is a kraft print with banners formed out of half-doilies.
Then I created the vertical piece with a tan strip with white lace sticker borders up each side. The doily on top is lined up carefully with one edge of the vertical strip and then a pre-stamped sentiment block went on popped up on foam tape.
The sentiment block was the only thing with black on it so I used a fine line marker to trace each of the other elements.
Ooops. A slip of the pen on the lower part of the doily outline created a need for an element of disguise. So I placed a small glittery butterfly over it. I added two more to make it look planned.
Ddd
As I was making this batch of sketch cards I had this metal heart that I kept wanting to use but it never fit in. Then I picked up OWH sketch 183 and knew it had found a home.
I also had another of those fancy diecuts and knew that would make a perfect frame for the heart. The heart was plain and flat so I ran it through the Cuttlebug in an embossing folder to add texture. Oh, yes!
Since I had a heart I selected paper for the background with 'love' text all over it. I layered this with a coordinating color in a simple print and a band of light green print.
That crosswise stripe was way too plain so I cut down and mounted a pre-stamped sentiment over it.
Every time I tested something for the dots on the right top it took away attention from the heart and sentiment, so I decided to leave them off entirely.
Ddd
The sketch for OWH 182 has the potential to produce a very busy card.
But by selecting papers with low contrast it actually came off as very low key.
The scribbly background has a cream tone rather than white. I selected the book text because it has the same cream and black.
The ogee in peach was pulled into the text element by coloring with alcohol markers.
This really turned out nicely.
Ddd
Here's a card that is rather wrong-side-out in construction. It is OWH 181:
The bordering is all a part of the background sheet. The individual panels are cut out and arranged on top of it.
I had two stamped stars already colored so I trimmed them to size. the other pink blocks were chosen to match the colors in the stars. The backing (borders) are in blue for the same reason.
The text is all actually one stamp. I placed tape over the parts I didn't want to print and then inked the stamp. The tape was peeled and I stamped in the first section. This was repeated for the other two parts of the stamp to complete the card.
Ddd
OWH sketch 180 is actually very plain:
I ran across the topiary sticker in my stash and decided to mount it on a black strip as that would match the bordering on the other elements.
I already had a sentiment stamped on a plain color block so chose to add another plain block behind it.
I selected a 'fretwork' paper as the backing paper.
I really like this one, much to my surprise when I first saw the sketch!
Ddd
Hmmm, I found the measurements on this sketch to be a little confusing. I'm not at all sure what that extra piece is on the right side and if the top right panel is cut as indicated over half of it is hidden. Take a look at OWH 179
Oh, well. I'll just pick out the parts I like!
I started with the floral and the striped paper background. Then I pulled coordinating papers and banded them with two tones of dark gray.
How lucky I was to have on hand a sticker sentiment that exactly matched the colors.
Ddd
When I saw the sketch for OWH 178 I knew I already had the feature element colored up
That is a LOT of bordering! But it does lend a rather formal feel to the sketch. I chose papers that I thought looked class, in keeping with the colored flower.
Putting the square brads on diagonal really elevates them.
I popped up the center panel on foam tape.
Ddd
I think this sketch (OWH 177) is rather clunky
I tried to salvage it by using a lighter element in place of the feature panel and used florals to further soften the look. These are vellum stickers.
I pulled colors from the florals for the blocks of backing and used black bordering for the contrast.
I used black rhinestones as shown but dropped them lower for balance.
Ddd
With all the wide open spaces on OWH sketch 176 I knew it was going to be 'all about the papers'.
I actually worked from the bottom up since the first paper I selected was the XOXOXs. I next pulled the two grays and then the red dot. This arrangement allows them to alternate so they stand out better.
I went back to the bin of fancy diecut labels and decided to use a red insert stamped with a sentiment.
Where the sketch uses three dots along the bottom edge I pulled in three red heart brads.
Ddd
As soon as I saw this sketch I knew exactly what element I wanted to use for it. Here is OWH sketch 175
That block of squares was perfect for a leftover teabag fold of a 'quilt' that I had in a bin waiting to be used. While I was there I ran across the onesie stamped on plaid and trimmed out.
This was shaping up into a very nice baby card! So I selected soft colors for the backgrounds and stamped a scripture to add on.
I brought the purple back in by using three 'button' brads where indicated on the sketch.
As a last element I stitched around all four edges before mounting on the base card.
Ddd
