A second strip of partial butterflies turned up in the scrap heap and got combined with blues and greens for a background.

A sheet of peel-off stickers yielded some sketchy outlines of butterflies that looked great over the printed ones.

A small realistic butterfly sticker covers a larger print one at the bottom of another strip on the background.

I used silver peel-off stickers to trim the edges of the card and add a sentiment.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

One of the scrappy background I created used a strip with only the right side of a line of butterflies on it. Man, I'm glad I didn't toss that out years ago when I first chopped a piece of scrapbook paper that left this behind.

I pulled out a sheet of silver butterfly stickers that have adhesive only on the body so the wings can be raised. Awesome, that's just how I like them!

I applied one sticker over each of the printed butterflies and placed a row of rhinestones for eadh body.

I gave this card a pink base to match the scalloped paper on the left. this reinforces the butterfly feature.

The sentiment is provided with a silver peel-off sticker to match the butterflies.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I went on a spree of gathering up strips from the scrap bin, organizing them by color group and sticking them to base cards for use as backgrounds. I ran the base card through the Xyron to apply adhesive over the whole surface before starting to stick the strips down.

In preparing to use these for cards I remembered I had signed up for a swap on the theme 'fashion'.

I decided to use a background where one of the strips was a print of dress patterns and fitting models.

I had a sheet of gold peel-off stickers in the shape of corsets. I took a white paper embossed with a floral tree and turned it upside down so the trunk was pointing up. By placing the corset sticker over the trunk and trimming around the corset and a half-circle shape I made it into a ball gown with a patterned skirt!

I sponged distress ink over the skirt to make the pattern more visible and to help the white become more creamy like the background papers. Then I used a scallop punch for the hemline of the skirt.

I used other gold peel-off stickers to add little dots to the skirt, outline the skirt, trim the left edge of the card, add some shoes and provide a sentiment.

The dress is popped up on foam tape.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I wanted to use a bunch of coordinated scraps to create a background and the ones I found were a combination of dots, stripes and banners. They were all in the rosy pink and grey color palette.

I used them in the sizes they were found in and adhered them to a base card before trimming them to a good size for a card front which would leave the borders of a black base card showing.

The colors were perfect for a Valentine card so I went looking through the sticker stash for some roses. Oh, I found some all right, but they were in a light purple and salmon-y yellow.

I realized that was NOT going to work with my background so I used an alcohol marker to color over the blooms and buff the color in with a cloth. I did the same with a green marker over the leaves.

After applying this large sticker on the scrappy card front, I decided the flowers needed more definition so I used a fine black marker to outline every petal and leaf.

I used a rub-on to add a sentiment to the upper left.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

When I made the card a few days back with all the diecuts on it I used a new die set to cut out two words. In doing that I ended up with the letters theselves that were left over.

I went through other scraps left over from previous sessions and came up with a piece of embossed white cardstock that I had sponged color onto.

The final piece I scrounged was a stamped image on watercolor paper. The stamping had not turned out well so I had set it aside. When I pulled it out I used a fine black marker to redraw all of the lines and then I painted it using Distress Ink as watercolors.

I pulled out a piece of green cardstock for the base card, echoing the color from around the globe. I placed a lace-printed paper at the top and added a sketched line around it.

I then tore and inked the edges of the stamped image and adhered it in the center.

The diecut words went on the bottom along with a dragonfly punched from some wrinkle-free distress background. I used a fine black marker to add some hashing to the green base card and the dragonfly wings, then added circles to the dragonfly body.

There was a bit of an issue with one leg of the 'W' when I peeled off the tape I used in aligning the letters. I used a line of green rhinestones to cover it and then added one to the dragonfly head and dotted the 'I' with another.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

However, I did get it to post on my Flickr page so I can give you a link to click on and you can view it there.

https://www.flickr.com/photos/mystudio3d/24132612803

I hope you enjoy seeing what we created.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Updated: Monday, 1 February 2016 1:52 PM PST

Share This Post

Post Comment | Permalink

A bunch of years ago I cut parts from the cover of a printed cardstock pad and dropped this piece in the scrap drawer. I was going through the drawer planning to winnow it an toss a lot of it out but this piece got moved to the 'use it' pile instead.

I pulled out a random selection of brown cardstock to use for bordering and a white diecut butterfly.

I chose a white embossed background and used a foam applicator to color the raised areas with Broken China Distress Ink. Over this I added the scrap panel on foam tape.

The butterfly got Old Paper Distress Ink applied to it and three oval rhinestones for a body. This was mounted to the scrap panel with the wings raised.

I bordered a pre-stamed sentiment and mounted it at the top of the scrap panel.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I had one small piece of the color blocking left. It got black bordering and then it kind of looked like a picture you might hang on the wall!

I pulled a piece of red embossed cardstock to stand in for the 'wallpaper' and gave that a black border as well.

A prestamped word was bordered in black and mounted next.

Here's where the analogy of the picture on the wall ended - when I added a diecut butterfly with inked edges and rhinestones on the body.

Everything is popped up on foam tape for dimension.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

A smaller chunk of the color blocked piece I created for yesterday's card was cut and bordered in black for today. I popped it up on foam tape over an embossed white cardstock and added this to a black base card for bordering it.

I had a diecut butterfly on white that I colored with Distress ink to match and bordered it in black to use. It is also up on foam tape.

I bordered a pre-stamped scripture with black and used foam tape to raise it up to the same level ad the color block panel.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I pulled out a bunch of scrap pieces I had left over of wrinkle-free Distress backrounds. As I had used the different colors for various projects I had just been tossing the leftovers in a bin.

I pulled out a piece of 8.5 x 5 black cardstock and ran it through the Xyron machine to apply adhesive. Then I carefully cut and placed various shaped and sized blocks of the colors while leaving spaces of the black background showing through in 1/8 inch widths.

Then I ran it back through the Xyron to apply adhesive over the whole colored surface.

I used this adhesive to hold clear embossing powder on the surface and melted it with the heat gun.

I cut a piece of this to 4 x 5.25 and mounted it on an A2 black cardstock for mounting on a white card base.

I had three flowers that had meen diecut from a piece of the blue Distress background and the edges had been distressed with Gathered Twig ink. I used a piercing tool to punch through them and the background and added three colored flower brads to hold them in place.

I bordered a pre-stamped text in black and layered it on top of the grid but tucked under a flower.

The resulting card is actually much brighter but the flash kind of grayed it out as it reflected off the clear embossing.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

The pattern I chose for a Valentine swap is one that fascinates me. A simple circle of evenly spaced holes is turned into a heart by stitching two layers with different combinations of using the holes in singles and pairs.

Hard to describe but effective when executed.

I stitched with red thread over a chocolate brown paper printed with music notes.

I trimmed this and added it to a cardstock printed with lace. To this main layer I added a thin satin ribbon at each end and then a red heart ribbon just inside this.

I used a grey base card that matched that in the lace layer.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

The assignment for this swap was 'abstract'. Generic enough?

I pulled out a pattern I created years ago and pricked it out on a subrle dotted cardstock.

I started at the outer edge and stitched the first row with red thread. The next row uses orange thread and the inner row is yellow.

In mounting I used a large scallop border punch at the bottom edge. Then I added a scalloped yellow layer and a scalloped orange layer underneath.

The base card is red so there is a replication of the color layers in the stitching.

I placed a thick acrylic heart sticker in the center of the stitched motif as a finishing element.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

Getting ahead on my swaps again. This time it is for an Easter card in paper embroidery.

I decided to combine my own cross pattern (designed in 2003) and the flowers from a free pattern I had in my files.

I picked a patterned paper with some scrollwork and a floral on it. I pricked out the floral over the printed ones and decided to stitch them in similar colors.

This was only mildly successful as they blended in a little too well. To recover them I did an outline of the elements in metallic gold thread.

I had planned all along to work the cross in the metallic gold thread and it was pricked out in the open space on the paper.

I bordered the card with shiny gold and used a green base card that matches the stitched leaves in the floral.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I decided to have another go at the papercrafts bingo again, this time using the correct grid!

I actually made a bingo two ways on this by using: Diecuts, Spring and Ribbons from one column and Punches, Ribbons and Green from one row. I also used Flowers from elsewhere on the grid but it didn't line up with any other items that I used on the card.

I used the topic of 'die cuts' for this entry because I used so many of them on this project. From front to back the die cuts are: butterfly (cut from fine green diamond cardstock), scalloped oval medallion (cut from a cream cardstock with textured diamond), scalloped frame (cut from wrinkle-free distress background and layered over green floral), words (cut from golden cardstock with Tim Holtz dies and backed with a fine green dotted paper).

I wove sheer ribbon through the holes on the medallion and knotted it at the bottom. The scallop up the right side is a border punch and the butterfly has a line of green rhinestones as the body.

I added a strip of butterfly washi tape just inside the punched scallop border.

There is foam tape under the golden layer, under the medallion and raising the butterfly wings.

I gave the project a green base card.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

So, today really IS the last baby quilt in the donation project. I finally reached the nice round number of 25 and have decided that is the best place to stop.

I used the same pattern as yesterday from Karla Alexander the author of Stack, Shuffle and Slide.

This time the fabrics were leftovers from my duffle bag and coordinating fabrics from the stash.

Again, I finished the backing, quilting and binding on this one so I could go as a completed project to the collection point on time.

Project done - What's next?

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I must admit to a bit of a quirk when it comes to numbers I feel comfortable with. I like numbers that are 'fun' like 11:11 on the clock, 318830 that spells my name upside down, and 252 that goes with an old joke by George Carlin.

I also like getting out of bed when the clock reads on the hour and will actually watch the clock to wait for it!

I feel uncomfortable when things don't come out evenly and so, when I ended up my baby quilt top project with 23, I couldn't stop thinking about 'rounding up' to 25 as a good stopping point.

I had taken a workshop with Karla Alexander, the author of this book:

She gave us a handout with one of the easiest blocks to make with just 5 fabrics and I used that to make my two additional quilts.

Sharing today the one made from scraps left over from my mystery quilt made on the cruise last fall.

Since I was running up against the deadline for the end of the project I chose to do the whole job, right through the backing and quilting. These quilts all have a binding made by double-turning the border to the back and top stitching it.

Tomorrow will be the last (25th) quilt in the baby quilt project.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

And as my final baby quilt top for the church project I created a 14 x 14 grid of 2.5 inch squares that were the final small scraps from all the other baby quilt tops I had made.

This collection of scraps was brighter than those I used in the last grid quilt and I enhanced that by using a bright turquoise border.

This is number 23 - and I am done!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

And here we are with my third misguided papercraft bingo. I'm not sure yet if I will go back and try to create with the CURRENT bingo challenge, or not. For this card I used "Paper Piecing", "Patterned Paper" and "Ribbon".

For this one I chose a couple of background papers I had created a while back and combined them. The back layer, bordered by a white shimmer cardstock over a magenta base card, is an alcohol ink/metallic marble on glossy cardstock. Over this I used a diecut shape cut from a wrinkle-free Distress panel.

For the stamped image, I colored all the skin with alcohol markers and paper pieced the hair, clothing and bunny.

I used a craft knife to trim close around the image, separating it from its white background. I used a die to cut two skinny hearts from shimmer paper and used them behind the image as wings.

I used glimmer gel pen on the flowers in her hair, her eyes, the lace hem and the buttons on her boots.

I was liking this glimmer so I added it to the rim of the diecut background and on both edges of the ribbons.

I used a large silver peel-off greeting at the top of the card.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

With still the wrong bingo challenge in hand I used the paper piecing parts I had set aside to make another card. This time I used, from the bingo grid, "Paper Piecing", "Candy Dots" and "Blue".

I chose a white cardstock with embossing on it and sponged on blue Distress Ink to show off the texture, rounded the corners and mounted it on a blue card base - also with rounded corners.

On the stamped image, I used alcohol markers to color all the skin areas and the ground and then paper pieced the hair, clothing and bunny with scrapbook papers.

I used gel pens to color in the flowers in her hair and on her apron, her eyes and the buttons on her boots.

I only had clear candy dots so used them over the flowers on the apron.

I used a craft knife to cut along the edges of the image and slid the halves of a die cut butterfly in to replace the stamped wings. These were popped up on foam tape.

I rounded the corners on the image panel and popped it up on foam tape over the background. Then I used glitter dust gel pen over the wings and the lace on her hemline.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I am SO-O-O-O-O lost! I set aside a papercrafting challenge to work on later and then, when I pulled it out, I pulled out an OLD one that looked similar to it instead. So I made three cards for the challenge and then can't use them for that after all!

The challenges were both papercrafting bingo where a 3 x 3 grid is filled with techniques, colors, etc and you make a card that uses three of them that appear in a line in any direction - 8 combinations are possible.

So, for the first card I chose to use "Birthday", "Yellow", and "Paper Piecing".

Quite a while back I had stamped an image on various scrapbook papers as well as on a white background. Then I put them all in an envelope to use later... hey, it's later!

On the white layer I used alcohol markers to color all the areas of skin. Then I cut all the papers and layered them onto the hair, clothing and bunny.

I used alcohol markers to color a ground for her and colored her wings with very pale yellow.

I bordered the trimmed image with bright yellow and popped it up on foam tape over sheet music I had sponged yellow and grey Distress Inks onto.

For embellishments I added rhinestones over the flowers in her hair, Liquid Pearls to the buttons on her boots and the flowers on her dress and glitter dust gel pen to her wings.

I used a large silver Dazzle sentiment at the top.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink