I got this quilt on and off the longarm as well as completing the binding in a single day. I am SO pleased with how it came together.

This is off the same pattern as a couple I finished this spring, Magical Squares. That's the one where the topis pieced on the square of grain then cut on a diagonat and swapped end to ent, cut again on the other diagonal and swapped side to side. When you turn it square again all the blocks are set on point. Then the border is added. 

With this version the most complicated thing was deciding where I wanted each of the shaded blocks to end up and calculating where they needed to be in the original layout to end up there with all the cutting and shuffling.

This was made with a charm pack that was cut from ombre fabric.

The quilting is a pantograph called Blooming Feathers done in lilac thread.

Exactly how I envisioned it!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Well, now! If I actually go down to the longarm room and load up a quilt it doesn't take long at all to get it quilted and bound. But I DO have to GO DO IT!

I did get sidetracked on my way to do this one and ended up sorting and cleaning out a drawer of strips and smaller scraps. That done, I got back on track and set to work on quilt number TWO of the 12-quilt line-up.

The original quilt that this is based upon hangs in the library on the campus of Motlow State Community College in Moore County Tennessee. I took a photo of it years ago when I was visiting family and then made up my own directions to recreate it.

In showing it to peers online, I have continual questions about block sizes, unit sizes, Accuquilt dies that could be used... So I wrote a full set of illustrated directions for it giving both Accuquilt and rotary cutting directions in 5 different sizes!

Mine is made entirely of scraps - with a different fabric for each of the leaves.

I used a leaf print for the border and quilted with a feather edge-to-edge pantograph using yellow thread.

For reference in scale, this center block is 15 inches. Entire quilt is 52 inches square.

Still deciding where this quilt will end up.

Ddd

Posted by studio3d@ccgmail.net at 6:50 PM PDT

Share This Post

Post Comment | Permalink

Seems like a VERY long time since the last posting. But I have not been idle. I have pieced TWELVE quilt tops but kept setting them aside to longarm later. I have finally come to a point where I felt I needed to set aside piecing and get to finishing up these projects!

The first one to come off the longarm was suggested by my son-in-law – A view of circle irrigation fields in Nebraska as seen from the air. I called it ‘Nebraska In Plane View’.

I used a friend’s Accuquilt cutting die for Drunkard’s Path to do all the cutting from my scraps of greens. I drew up a pattern and pieced the whole top. Then I whacked it apart and inserted a wide bias strip for the river. The road required me to make my own bias tape which I top-stitched along both edges. I created a bridge over the river with stitching, too. The farmhouse and the barn are paper-pieced and I added shading on and around them with alcohol markers.

Once on the longarm, I used green thread to made a variety of patterns of crops. Each border was quilted separately – serpentine for the inner border and leafy vines for the outer border.

Ready for a label and shipping off to my son-in-law - the man with the plan!

Ddd

Posted by studio3d@ccgmail.net at 5:30 PM PDT

Share This Post

Post Comment | Permalink

Back in February I watched a tutorial from the Missouri Star Quilt Company on a table runner they called 'Lots O Luck' in which four greens and a neutral were used to create interlocking rings.

I thought it would be neat to use that pattern with a black background floral that I had along with four pastels that appeared in the print.

This is made from a single 16" block which is simply turned top to bottom on alternate blocks to create the links. SO COOL!

In stitching the blocks I tried to turn the pink blooms to the outer edges of their area as much as possible so there would no be ones that were hacked in half in the middle of the smaller squares (which are made up of four-patches, nor the large center of the rings (which all have a seam up through the middle.

I had a small print floral in the same colors to use as the border and it is bound with a blue and white polka-dot.

Here you can see the quilting done with a pantograph on the longarm.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Once upon a time I bought a yardage of fabric with very wide floral stripes and narrower decorative strips. Over time I deconstructed it to use the best of the florals on a quilt (see circled areas on photo).

Then, later, I combined the narrower stripes with other random fabrics to create this quilt (again, see circled areas).

What I was left with was the parts of the wider strips with the less desirable floral areas. I could get 21 squares out of these.

I framed them out with 1" strips of a faded-looking floral that wouldn't draw attention to itself.

These were sashed with a dark green marbled print and set in a 4x5 arrangement (20 total).

The border was selected to pull colors from the blooms in the blocks.

All-in-all I think it looks very old-fashioned - like a vintage couch in a 'granny's parlor' so that led to the naming of it.

I used my domestic machine to quilt with an over-all meander.

To be gifted to hospital's Passages program.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

I was noodling around a couple of years back and came up with this bunny block pattern based on one I had seen online. I drew ip up in ElectricQuilt7 and LAST year I finally selected fabrics for it - all scraps.

When we had the lo-o-o-o-ng power outage in February, I took fabrics and cutting supplies into one of the rooms with good outdoor light and cut lots of kits for quilts. This was one of those.

At long last, It worked its way to the top of the pile so I got to assembling it. Not as easy as it would seem when matching the joins for pieces that took off at an angle.

But I have prevailed!

I set it 3 x 3 within sashing and bordered it to come up with a 40" baby quilt.

As you can see, there is not a single 'baby fabric' in the lot of them. But it is bright! I backed it with a flannel with confetti dots and quilted with a heart pantograph on the longarm.

This will go to a local non-profit that distributes to new mothers.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Look at me, all 'quilty' and everything!

I gifted a certificate for Christmas good for one Queen-size quilt. The recipients already had fabrics in mind to use and, remarkably, the palette was the same as the last projects I made: Blue and Yellow (with white).

I got to design the pattern to make the best use of the yardage provided and I added just a bit of light blue and light green to widen the options in the design.

This quilt finished at 90"x102".

Here is a close-up so you can see the quilting with a floral pantograph.

The customer was pleased.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

As a complement to the placemats posted yesterday, the same family member requested the same pattern (Road to Oklahoma) in the same colors (blue and yellow) but designed as a bed runner for a queen bed. This is the first bed runner I have ever made.

On the traditional Road to Oklahoma there is a single block with a diagonal design which, when rotated on alternate blocks, forms the stars and chains. However, it also creates each of the large squares out of a four-patch - a seam right through the middle both ways. I did not find this attractive and also did not want the bulk of all those extra seams.

So, I worked backward from the end product layout and redrafted the pattern to be constructed in two different blocks - a sawtooth star and an uneven 9-patch. I cut all the parts with my Accuquilt using the 8-inch qube.

For assembly, I alternated each of the 9 pairs of blocks (making sure to keep the florals facing the right way) into a long unit and then constructed strips of the outer pieces and sewed them on. Last step - the 3-inch border.

I quilted on the diagonal throughout.

This fits a queen bed.

Ddd

Posted by studio3d@ccgmail.net at 10:19 AM PDT

Share This Post

Post Comment | Permalink

Wow, it has been a long time since I posted on the blog! I am generally doing something that warrants posting, like Bible journaling (but I have been doing scripture writing, a devotional and verse mapping rather than artwork in the Bible or a hymnal) or traveling (none of that going on) or quilting (but I have been making tops and setting them aside to do in a batch).

Up to now, I've had nothing finished for posting.

However, I did make a couple of placemats on request. The pattern was already chosen (Road to Oklahoma) as was the palatte (blue and yellow). I used my Accuquilt cutter to make all the parts and the 6-inch qube made it easy.

Because I wanted the design centered on the 12x18 mat, the standard method of making the base block and twisting/turning to create the mat was not going to work. So I broke down the drawn design and cut parts to assemble in columns.

Here are the finished placemats (yes there were only 2, as requested.)

These were quilted in the ditch to maintain their clean look.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

I love a good pun or any play on words and often employ them in naming my quilts (in case you hadn't noticed).

Today I finished up this quilt for myself and, because each block is different and most are florals, I named it Garden Variety Bunnies.

This is from a pattern called Country Bunnies and I selected 16 fat quarters that went well together and a whole variety of neutrals for background. The only things that are common between all the elements are the lavender collars on the rabbits, their tails and the dotted cornerstones.

In these couple of closeups you can better see some of the free-motion quilting I did. The outer border is leaves and vines, the sashings are reversing loops, the block backgrounds are meander with a squiggle under the bunny. All of the bunnies are 'outlined' with little scallops facing the inside edge and a looping fill. The tails are filled with swirls.

I selected a lavender sheet to use for the backing (matches the collars on the rabbits) and binding. However, it turned out to be cotton/poly in a strange weave that made it extremely ravel-y. I left the excess batting and backing on the quilt while I secured the binding and then used the serger to overlock the edges while its blade trimmed off the quilt. This was all covered when I turned the binding over to the back and stitched it down. Whew!

First quilt of the year is DONE! Gonna be snuggling under this one tonight.

Ddd

Posted by studio3d@ccgmail.net at 5:11 PM PST

Share This Post

Post Comment | Permalink

All the colored pencil shading and blending I did for online class in the last couple of days culminated in a bible journaling page.

The lesson had us combining the sphere coloring, color blending and use of odorless mineral spirits to create a forest of round trees. I found a place for them in Leviticus.

I added some shadows cast by the tree trunks!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

While I was in the groove from yesterday's class I jumped right in to Lesson 5... Well, that was my intention anyway. Then I discovered that the lesson did not have any worksheets but were intended to use specific stamps. Oh, poo! I don't have any of those stamps.

So I went on the internet and searched for 'how to draw a cartoon bunny' and combined a couple of those to make my own. The trees were simple shapes so I drew those as well. THEN I got to do the coloring we were shown in the class videos.

This lesson was all about blending. I used three colored pencils for each object and blended with odorless mineral spirits.

The final part of this lesson was to do a bible journaling page with the trees, coloring and blending. Since that is a different topic in my blog, I'll share that tomorrow.

Ddd

Posted by studio3d@ccgmail.net at 10:22 PM PST

Share This Post

Post Comment | Permalink

I finally got back into one of the online classes I registered for. This is Colored Pencil Jumpstart and I am up to Lesson 4 - Shading.

First we tackled spheres and eggs, then on to cubes and cylinders. All of them were to learn how to shade differently to demonstrate where the light source was.

Then we learned to identify various shapes in drawings so we could apply the appropriate shading techniques to them to render them in 3D.

Another exercise had us create a 3D colorwheel using shading and blending.

The last worksheet is set up so you can try out lots of color combinations 'just for fun'.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

Over the course of the time we've been in our house we have seen a wide variety of wildlife hanging about. This hawk is fairly relatively new for us and it has taken us about a year and a half to get a realy good photo.

This is a Sharp Shinned Hawk. We had four of them around for a good part of the summer - hunting in the pasture, sitting in the front yard trees eyeing the squirrel feeders, hanging out on the railing of the deck keeping watch over the bird feeder... These birds feed on smaller birds and sometimes small rodents. We have seen them snatching up a chipmunk!

It is difficult to distinguish these guys from the Cooper's Hawk but, based on size and habits, we're pretty sure we've figured it out.

There is a bird feeder just to his right side so I assume he's waiting for his lunch to arrive!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

Welcome to another year on my blog!

This year, in scripture writing, I am planning to focus on the Names/Attributes of God in order as they are introduced in the Bible. This includes Father, Son and Holy Spirit. Thses scriptures will be written in my Happy Planner and will be my activities for Monday through Friday. I am also planning to do Bible journaling pages around some of these scriptures which will happen on random days.

I picked up some of Shanna Noel's devotionals: 100 Days of... and will use those as my Saturday-Sunday activities. These will sometimes involve art pages and be shared here. I haven't decided which of the three books I bought will be the one I use this year.

I also do Verse Mapping which is scheduled once per week, but not assigned to a specific day.

For the first Bible page of the year, I went to Genesis 1:1 and, focusing on the name itself, I shortened the scripture to read "In the beginning... GOD"

I had a piece of clipart from Creative-Bible-Journaling.com as the starting point. I took out their lettering inside the banner and added the same words back in Old English (Gothic) lettering. I hand drew all of this lettering as well as the GOD (same font) for the bottom of the page.

I added more doodles to the original artwork and then traced all of it into my Bible. The black fill for the letters is all with Prismacolor markers and the coloring on the artwork is Prismacolor Premier colored pencils.

Posted by studio3d@ccgmail.net at 10:35 PM PST

Share This Post

Post Comment | Permalink

Just by the skin of my teeth I finished these last two quilts within the year - bringing the total to 26, a new high for a single year. These also bring the total I will have donated to our hospital to 99 though these won't be delivered to them for a month or so.

I found the pattern for these in a quilting magazine and it was a totally new concept for me. Start with 4o squares and frame them with sashing and cornerstones on two sides. Set them together in a 5 x 8 layout (leave that one side and top without sashing). From the bottom left corner slice at a 45 degree angle to the right side. Take the resulting bottom triangle and stitch it to the top. You now have a trapezoid. Make another 45 degree angle from side to side and sew the resulting triangles together. Magically you end up with a rectangle again but one in which the squares are all set on point.

I changed the pattern by using wider strips for the sashing and ended up with quilts mesuring 50 x 60 inches.

I really don't like to make a project and then start over and make another just like it. So I let these quilt 'grow up together' step by step. They are made from essentially the same supplies although I did run short on the yellow for the inner border and made it pink (matching the sashing) on the other quilt. Everything was cut together, centers stitched one after the other, border one added to both, outer border added to both and placed on the longarm one after the other on one long backing and batting. Then they were bound one after the other.

The first one throughout all the steps was this one - called First Among Equals (for the process of creating identical quilts in tandem). 

With the exception of the yellow cornerstones and border are all from black and blue background calicos and pink daisy fabric from my late sister's stash.

Here's a closeup of the fabrics. It is quilted with a fine yellow thread.

The second quilt I called Save the Last Dance For Me. This was because it was the last one done AND the song was playing on my iPod during the binding process.

The color really isn't as fat as it appears in the photo. Here are the fabrics and you can see the heavier pink thread used for quilting.

The backing was selected to go with the vintage feel of the calicos. It is a parchment colored print with ledger entries in sepia script dated in the 1700s.

That's it! A close to another quilt year in grand fashion.

Ddd

Posted by studio3d@ccgmail.net at 7:12 PM PST

Share This Post

Post Comment | Permalink

As I was gathering up my favorite art I had created in 2020 I realized they all fell into one of two categories: Hymn Journaling or Quilting. So instead of going strictly in date order they will be grouped like that here.

First, a synopsis of the overall creative output and milestones for the year:

• I made and sent 66 cards including birthday, graduation and Christmas
• I lettered 52 pages of fancy font alphabets
• I did verse mapping of 53 scriptures
• I wrote out 365 scripture verses
• I wrote out lyrics for 66 hymns
• I did art journaling on 37 hymns in my hymnal
• I made 93 Bible journaling pages
• I completed 8 pages in my drawing sketchbook
• I made 26 quilts - a new record for one year (the last two will be shown tomorrow)
• Two of the quilts were donated for non-profit auctions. One raised $360 and the other raised $550
• I brought my total quilt count up to 206 in the 10 years and 4 months I have been making them

My favorite hymn pages of this year are:

Softly and Tenderly - June 10

He is Lord - October 22

I Will Sing Of the Mercies Of the Lord - December 10

Of the quilts I made, these are my favorites:

Converging Daydreams - a new imagining of a Convergence quilt, combining the elements of two planned quilts

Wild Goose Chase - one of 6 quilts I made beginning with orphan blocks from previous projects

Three quilts I made beginning with parts of the same strip sets - Get To the Point, More To the Point, and Point Taken

All-Star Animals - auction quilt for the zoo

Bid Me Goodnight - auction donation for the Edwards Center

All in all it was a very productive year. I have lots of plans and self-challenges for 2021 and you will get to see it all here.

Don't forget to check in tomorrow to see the last two quilts of the year!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

Today I'm sharing the last four font alphabets I did in my planner this year - that's 52 weeks of a new font every week.

The first is this lovely 'crown' lettering.

Some of these I did not use on scriptures in my bible as they were 'assigned' in the same book in which I had already used them before.

Ddd

Posted by studio3d@ccgmail.net at 2:09 PM PST

Share This Post

Post Comment | Permalink

The assignment for this page was to use a 'scroll' in the book of Revelation. I had taught a scroll in a drawing lesson in 2018 so it was easy to revisit that to create this one.

I used some colored pencils for the shading and a brush marker for the lettering.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink