Go big or go home! that was my dilemma when starting to replicate the July tag from Tim Holtz. Here is his creation:

Tim made HIS tag with the mini versions of the patriotic blueprint stamps which I do not have - I have the standard size of them.

The solution was to up-size the whole project into a 6 x 10 hanging wall piece.

Here are the steps and supplies I used to complete this project:

- adhered text-printed scrapbook paper to the surface of a chipboard cut to size.

- use sandpaper block to scuff all 4 edges.

- stamp patriotic blueprint stamps onto heavy watercolor paper using black Archival ink.

- use deckle-edge ruler to tear against at the top and the bottom of each image.

- use Distress marker ink as watercolors to color the images. include drop-shadows painted with Pumice Stone ink.

- smear Versamark across images to create a resist. (this didn't seem to have any effect so this step could easily be skipped)

- use a very wet brush to add Pumice Stone Distress Ink over the images. blot off excess ink to keep smearing of colored images to a minimum. dry with heat tool.

- trim sides off images to fit them on text background.

- distress the edges with Frayed Burlap Distress Ink. Wet with aquabrush. dry with heat tool.

- adhere centers only of the images to the text background.

- stitch around all 4 sides of all 3 images. (this is the reason the glue was only in the center in the last step - so the machine needle would not have to go through it)

- decorate flag panel with rhinestone 'stars'.

- add silver Dazzles 'celebrate' peel-off sticker at the top of the USA panel.

- add stickers, rub-ons, rhinestones to star panel.

- use spritzer to spray black soot Distress Marker ink on panels.

- color opposite edges of cream colored seam binding using a blue Distress Marker and a red one.

- spritz ribbon with mini-mister to start colors running. blot before colors run together in the middle.

- dry with heat tool, scrunching to wrinkle as it dries.

- tie ribbon to holes, attaching star charm by stringing through one end of the ribbon.

So, here is my completed hanging decorator piece which I used as a hostess gift for the neighbors who hosted our Independence Day get-together.

It's on a different scale than Tim's original but the general effect is the same.

I also covered the back of the chipboard piece with scrapbook paper to create an attractive finish.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | View Comments (1) | Permalink

Back to some hands-on artwork for a while. It was time to do my version of the June edition of Tim Holtz's 12 Tags of 2015.

Here is his original:

I'm pretty sure I did not have a single item that Tim used so I went for more of a 'look and feel' interpretation.

I made a distress background to start with using scattered straw and gathered twig distress pads, a craft sheet and a mini-mister. This was dried and then I had to figure out how to get a distressed plaid over it.

I used a custom inked pad with adriondack reinkers. Then I got out a rubber brayer and wound twine on it until most was covered. This was inked on the pad and then run over the distress background, first one direction and then the other until the coverage was like I wanted. I cut this down to size and used the distress tool on all the edges then inked them with gathered twig. This was set aside.

I drew a pattern for a latte cup and cut various parts from printed paper, corrugated cardboard and clear transparency. I used a scoring tool to make some creases at the appropriate parts.

I cut down the transparency bubble to fit the top of the cup and attached it to the upper edge with scor-tape. I used Picket Fence distress stain on the back of the bubble and dried it with the heat gun.

I didn't have a straw so I got out a clear plastic pick and used alcohol ink to color it.

I used two sets of stamps to create a greeting and cut the strip down to a flag shape. this was distressed with the mini-tool and then inked with gathered twig. I cut a strip of grass cloth to go behind it.

The latte cup was adhered to the plaid piece using foam tape and leaving just the right abount of space for a gift card to slip behind. I then stapled the sentiment assemblage to the front.

The plaid unit with all these layers was adhered to a card front of the same material as the sentiment. It also matches the 'straw'.

With the addition of a 'real' gift card for a coffee stand and a hand-written thank you message inside, this is ready for gifting.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Just squeaking this challenge tag in under the wire. In two days it will be time for another challenge!

Here is the original tag made by Tim Holtz:

As always, I read the original instructions (with photos) and made notes for myself. Then I went to the studio with just the written step-by-step and pulled supplies from my stash that were 'sorta like' the ones Tim used.

Here's my process:

-Use Xyron to adhere neutral-colored grasscloth wallpaper sample to stiff cardboard

-Cut into tag shape

-Place a letter stencil on upper left and use an old gift card to spread texture paste in a small section. Let this dry

-Select bits of small ephemera that look vintage and set aside

-When texture paste is dry, use foam tool and distress ink to tint the paste.

-Ink edges of tag with brown distress ink

-Select a small black and white photo

-Use distress markers to color the photo and follow up with immediate blending away excess ink with cotton swab

-Apply postal-type rubons to surfaces of ephemera and tinted photo

-Tie crinkle ribbon around tag

-Select word token and memo pin and attach to ribbon

-Select small quote and cut into strips. Adhere with matte medium

-Attach tiny paper flowers with heavy glue dot

-Use brown distress ink to tint word strips

Whew! Made it!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Upon the news of the death of one of Operation Write Home's volunteers we were challenged to make a card cased from one she had made as a tribute to her.

I chose to make one based on this:

I actually had the same little workman as he is a digital that I downloaded from OWH some time back. I colored him with alcohol markers (three tones of each color) and I fussy cut him to use.

I embossed the background of silver cardstock with the diamond plate Cuttlebug folder and added two strips of 'masculine' papers.

After creating the text block I remembered these brads that look like phillips screws. So cute!

I gave the little guy some eyes inside his blank glasses and popped him up on foam tape.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

We're still working on April in the projects inspired by Tim's 12 Tags of 2015.

As a reminder - this is Tim's version:

Here is the process for my third card:

-cut watercolor paper

-stamp flower heads and stems with Archival Ink in jet black

-mist paper with water

-use bulb sprayer to apply two colors of Distress Ink to background

-dry with heat tool

-use darker Distress Marker to draw partial outline on some of the petals

-use aquabrush to pull color into the petal

-dry

-scribble that color and another lighter one on acrylic block

-use aquabrush to color the petals with these inks

-use same process for stems

-dry

-use Pumice Stone distress marker scribbled on acrylic block to aquabrush a drop shadow around flowers and stems

-ink outer edges of paper with dark distress ink using a foam tool

-put black soot Distress Marker in bulb sprayer

-lightly speckle the background

-cut a backing piece

-ink edges with dark distress ink

-use die to cut out words

-cut a slit above and below the words

-feed the floral behind the diecut strip

-use sewing machine to stitch around all four edges of floral tag

-diecut another word from matching paper

-use very fine line marker to faintly outline the diecut areas and words to separate from the background

-use some of the floral marker ink to watercolor inside the cutout diecut area

-adhere whole to a card base coordinating with the florals

And here is the resulting third card:

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Continung with my creations inspired by Tim's 12 Tags of 2015. We're working on April.

As a reminder - this is Tim's version:

Here is the process for my second version:

-cut watercolor paper

-stamp flower heads and stems with Archival Ink in jet black

-mist paper with water

-use bulb sprayer to apply two colors of Distress Ink to background

-dry with heat tool

-use darker Distress Marker to draw partial outline on some of the petals

-use aquabrush to pull color into the petal

-dry

-scribble that color and another lighter one on acrylic block

-use aquabrush to color the petals with these inks

-use same process for stems

-dry

-use Pumice Stone distress marker scribbled on acrylic block to aquabrush a drop shadow around flowers and stems

-ink outer edges of paper with dark distress ink using a foam tool

-put black soot Distress Marker in bulb sprayer

-lightly speckle the background

-cut a backing piece the size of the card front

-ink edges with dark distress ink

-use die to cut out word

-cut a slit above and below the word

-feed the floral behind the diecut strip

-use sewing machine to stitch around all four edges of floral tag

-diecut a word from matching paper

-attach rhinestones to front of diecut strip

-adhere whole to a card base

That being said, here is the resulting second card:

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Time for another creation inspired by Tim's 12 Tags of 2015. We're now up to April.

This is Tim's version:

I made three cards from this inspiration but will only show one today (saving the others for the next couple of days). Here is the process:

-cut watercolor paper

-stamp flower heads and stems with Archival Ink in jet black

-mist paper with water

-use bulb sprayer to apply two colors of Distress Ink to background

-dry with heat tool

-use darker Distress Marker to draw partial outline on some of the petals

-use aquabrush to pull color into the petal

-dry

-scribble that color and another lighter one on acrylic block

-use aquabrush to color the petals with these inks

-use same process for stems

-dry

-use Pumice Stone distress marker scribbled on acrylic block to aquabrush a drop shadow around flowers and stems

-ink outer edges of paper with dark distress ink using a foam tool

-put black soot Distress Marker in bulb sprayer

-lightly speckle the background

-cut a backing piece

-use distress tool on edges

-ink edges with dark distress ink

-use die to cut out word

-cut a slit above and below the word

-feed the floral behind the diecut strip

-use sewing machine to stitch around all four edges of floral tag

-diecut a word from dark paper

-attach an embellishment to front of diecut strip

-adhere whole to a card base

That being said, here is the resulting first card:

Back tomorrow with version 2.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

More scraps laying on the table so I decided to make more of the very early Christmas cards.

For the first one I had used the front side for experimenting so I had to turn it over and play with the side where the pattern was indented instead of raised. This also put the border strip on the left. coloring was more challenging since I was coloring into the indented areas but it worked out fairly well. I couldn't stamp the text onto the background because it would have missed where there were sunk in dots. So I stamped on a buff paper, cut a fishtail and raised it up on foam tape. I liked black bordering for this.

I had one more of the embossed panels left but no more of the globes or diecut word. So I just colored it up and left off the ground line. I stamped the full greeting on the background and added a star in the sky which I colored with yellow.

This needed a bit of pizzaz so I used three different colors of Stickles to add over the snow ground and dots, colored background dots and the star.

Black bordering worked really well on this one, too.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

WOW! Time for the year-end-review already? What a busy and fulfilling year it has been in my art world. I had a hard time choosing just one item from each month to showcase.

JANUARY

On January 22nd I posted this card made with peel-off stickers, pearl pen, shimmer cardstock trim, Martha Stewart paper, Tim Holtz distress paper, and Distress Ink.

FEBRUARY

On February 26nd I shared this card as part of a tutorial I wrote on 'hacking' acrylic stamps to make parts adjustable (the ears in this case). The card also features 'out of the box' diecutting and 'watercoloring' with Distress Marker ink.

MARCH

I shared this card I made on March 29th using a pattern designed for an applique quilt. I used patterned papers instead, carefully cut and layered.

APRIL

On April 14th it was a card I created using a waxed paper background, a stencil and Distress Inks. I want to go make more of these.

MAY

The project I chose from May was posted on the 9th. This necklace was constructed from store-bought wire stars, star buttons, an old bracelet and jump rings. This was a big hit with the 'jewery staff' on our cruise ship!

JUNE

On June 20th I shared some cards using formula cutting of 6 x 6 paper pads and mix-and-match assembly. I especially like this one with a butterfly sticker and three butterfly punches.

JULY

From July 2nd I just had to share again the awesome wall hanging I designed for my son-in-law. I also wrote a tutorial/pattern for this which is available on request.

AUGUST

August 25th was the post date for my largest quilt to date. The king size creation is a tribute to our late black lab - Chuck the Dog - and a gift to my hubby. Features include applique (center), original paper piecing (dog heads), fussy cutting (puppy blocks), and free-motion quilting.

SEPTEMBER

On September 1st I shared some cards using a black embossed background stamp and watercolor markers. I love the dramatic look of this.

OCTOBER

October's best share was on the 8th. I used my own hand-carved stamp on a fancy diecut and colored with blended alcohol markers. I employed a new-to-me background shading technique, too.

NOVEMBER

Narrowing down November to just one was the most difficult but I finally settled on the Birdhouse Neighborhood quilted wall hanging from the 21st. This was the most inventive quilt I have done and I absolutely love everything about it.

DECEMBER

And finally, the December 8 project which is another quilt! I made this with scraps from other quilts I have made (41 of them to date) and only had to buy for the border and backing. I love picking out the fabrics and remebering where they were used before.

So there you have it! My favorite cards, quilts and jewelry from 2013 and the techniques that make them special. Many more quilts this year in the review but I then made more quilts this year than in the past, too!

I will close out this year with a special wish for each of you to have a Happy New Year. Go forth and create!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

I had one more idea jump into my head while cleaning off some scraps off the desktop - specifically a word diecut and a punched white circle. The word was a Tim Holtz shaped cut of 'peace'. When it fell on top of the circle I was inspired to create the first two Christmas cards for NEXT year!

I dig out an old stamp of an antique map of two hemispheres and stamped it on the circle. I actually did this with two circles and different inks so I could do the coloring in watercolor markers and in alcohol markers to see which I would like better. I liked the both so made cards with each.

I added some black punched bits to create a globe stand then mounted the cut word on foam tape over top.

To create the background I used two embossing folders on white cardstock. The right side is a border folder and the main field is the swiss dots folder. I used the same style of markers to color the embossing and drew a ground line with black marker.

The globe was mounted and a coordinating border added to the card base. Then I stamped additional text at the bottom.

Here is a view of the raised word:

I wouldn't say I'm READY for next Christmas, but I do have a head start.

Ddd 

Posted by studio3d@ccgmail.net at 12:01 AM PST

Share This Post

Post Comment | Permalink

...and the LAST installment, too!

This final group of cards uses a sheet of thick word stickers I was gifted in a swap.

for this one I 'joined' them with a stamped word

...and one punched butterfly.

So, there we are with 42 cards all in one 'style' of construction/design.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Feeling a bit punchy today? Although I used punched butterflies on a few of the other cards in this series, for this card that is ALL I used. I glued down a solid colored one then 3D mounted a patterned one over the top.

I couldn't leave it at that so I added a cardstock sticker of text.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

I had a sheet with just three vinyl stickers. Had I more of these I might have used them, but alas...

I mounted them on bordering materials to match the rest of the card and they are all popped up on foam tape.

This one got an extra strip of patterned paper.

This one had a large open space so I stamped a sentiment in it.

You can see why it would have been nice to have more of these.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

One lone card - that's all I have for today as it is all I made with a hard acrylic sticker. This was one left on an old sticker sheet.

What a romantic feel!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Another gift of supplies contained some black and white acrylic text stickers. YUMMY!

I didn't use very many of these because the high contrast was a bit much for most of the cards I had set up.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

Next to butterflies, I guess I like flowers next best. I chose some flower stickers to embellish the cards being shown today in the 6x6 cutup project.

This one also got a 3D text sticker

Love the scalloped border punch on this one.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

We're still got several days of 6x6 cutups to go through. that was a BIG project!

Today I decorated with 3D butterfly stickers I picked up on sale recently. For some of them I placed them on a bordering color to match that on the patterned paper pieces.

Some of these got punched butterflies added as well

These butterfly stickers have a glittery bit on them, too.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

In a gift of card supplies I got a sheet of text stickers. I used some of these to decorate some of the 6x6 cutup cards.

Now THOSE are some simple cards.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

For this installment of 6x6 cutups I used tissue tape (washi tape, paper tape) on my cards. I don't have a lot of this and I'm not fond of it being SO removable. For this reason I always make sure I wrap it to the back before adhering a unit to a card.

This one uses an opaque tape with number markings. I also added some wooden flowers.

For this card I added a single strip of translucent tape that echoes the butterflies in the lower papers.

And, finally I used a wrap of several strips of text-printed translucent tape on this one. I also added three double-layered silk flowers adhered with grey brads.

LOVE this color combination!

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink

After that little graduation break I'm back with more from the 6x6 cutup sessions.

This one features a standard sticker.

I added some punched butterflies to cover part of the text on the sticker.

Ddd

Posted by studio3d@ccgmail.net at 12:01 AM PDT

Share This Post

Post Comment | Permalink